Autel Evo II Dual 640 Rugged Bundle

The EVO II Dual provides a high resolution FLIR image along with an 8k 48MP camera to give you the most versatility of any small drone at an affordable price.

Category: GTIN: 6958265181146

Description

• Highest resolution 640×512 30Hz thermal camera available (non-military)
• 8K RGB camera for detailed imaging and documentation for arson investigation,
mapping, and overwatch in daylight
• 4X Lossless zoom, 8X Digital zoom
• Best-in-class OmniDirectional Obstacle Avoidance Technology®
• Autonomous search grid-capable for rapid, accurate scene capture
• Compatible with all 3D Imaging software for accident reconstruction
• Camera system with live view on remote or send to command monitors via
Autel LiveDeck™
• Interchangeable sensors/payloads
• Safely flies in high wind, urban environments with stability
• 40 minute flight time
• Airborne in under 40 seconds
• Stream IR and/or RGB video anywhere, anytime when combined with Autel
LiveDeck™

FAQ

Where in the US is the Autel Evo II being produced?

Bothell, Washington

What percentage of the parts are made in the USA?

Over 75% of the EVO II™ Rugged Bundle value is made and sourced from USA producers.

What is the difference between “Assembled in the USA” vs “Made in the USA?”

Autel’s Bothell facility receives components (parts) from various suppliers such as components from Sony, FLIR, (among other components). These parts are soldered, screwed, connected, assembled, calibrated, tested, and packaged in the USA. “Assembled in the USA” is essentially a means of expressing a kit form-build that is shipped (often from China) and assembled in the USA. “Assembled in the USA” may not meet the Customs substantial transformation standards for determining the origins of a US Origin product.

Which components are being produced in the USA?

Most components are from the US. The airframe, batteries, and remotes are imported and undergo further production operations in the USA to make the EVO II™ Dual. Suppliers such as FLIR, GPC, FoxFury, TacSwan, Pix4D, etc. are all components in the Rugged Bundle.

Is Autel Chinese owned?

Autel is owned by US citizens and Chinese nationals.

Is the EVO II™ DUAL on the approved list of drones for the US Govt. since the EVO II™ Dual is produced in the USA?

No. Autel did not have opportunity to participate in the Blue selection process given release cycles and evaluation window.

Will the bills in the House and Senate currently impact Autel?

All Autel products manufactured in the USA are currently compliant with proposed changes in US law.

Are there plans for Autel to further increase their focus on US sourced products?

Autel is working towards being a USA-only brand.

Will the EVO II Dual qualify for US Made RFP’s for US Products since it is labeled Made In the USA with foreign and domestic parts and labor?

Yes.

Will municipal and or federal government agencies require documentation on our EVO II Dual Made In USA claims to qualify for purchasing?

Perhaps. If so, please contact Autel Enterprise Robotics for further information.

Is Autel Enterprise a different company from Autel Robotics USA?

Autel Enterprise is the brand of products focused on Public Sector and Enterprise customers in the USA.

Will all of my data be safe with the EVO II Dual?

Data is safe with Autel products. Our products do not rely on LTE, do not connect to servers, and may be operated either without mobile devices, connectivity, or in Airplane modes once local maps are downloaded. Autel has no servers outside of Houston, TX, where users are able to determine if their logs will be stored or not, and at no time are photos, videos, EMEI, or other data transmitted to the Houston, TX servers. Autel does not have access to user data. In other words, user data remains within user control at all times. Contact our customer service department if further detail is required.

Will I be able to use my Made in The USA EVO II Dual for my department if there is a ban on Chinese made drones?

The Autel EVO II™ Dual is made in the USA of foreign and domestic components at labor. Contact Customer Service Department if further detail is required.

Specifications

Thermal Camera

 

Image Sensor FLIR BOSON Sensor 640*512
Pixels EVO II Dual (640) 640*512 EVO II Dual (320) 320*256
Pixel Pitch 12 µm
Wavelength 7.5 – 13.5µm
FOV EVO II Dual (640) 32° EVO II Dual (320) 34°
Thermal Sensitivity/NEdT <50 mK
Zoom 1 ~ 8x
Still Photography Modes Single shot, burst and timelapse
Still Photography Resolution IR: 640*512 PIP: 1920*1080, 1280*720
Video Format MOV/MP4 (H.264/H.265 supported)
Video Resolution 640*512 p60 (US) 640*512 p9 (other regions)

Camera

 

Image Sensor 1/2″ CMOS
Pixels 20MP
Perspective 82°
Lens EFL: 28.6 mm Aperture: f/2.8–f/11 Focus Distance: 1m to any distance (with autofocus mode)
ISO Range Video: 100-6400 (auto) Photo: 100-12800 (auto)
Zoom 1-8x (Max 3x lossless)
Still Photography Modes Single Shot Burst: 3/5 shots Auto Exposure Bracketing (AEB) Time-lapse: 3/5 shots
Still Photography Resolution 5472*3648 (3:2) 5472*3076 (16:9) 3840*2160 (16:9)
Video Format MP4 / MOV (MPEG-4 AVC/H.264, HEVC/H.265)
Video Resolution 6K 5472*3076 p30/p25/p24 4K 3840*2160 p60/p50/p48/p30/p25/p24 2.7K 2720*1528 p120/p60/p50/p48/p30/p25/p24 1080P 1920*1080 p120/p60/p50/p48/p30/p25/p24
Max Bitrate 120Mbps

Aircraft

 

Takeoff Weight 2.5 lbs (1150 g)
Max Takeoff Weight 4.4 lbs (2000 g)
Diagonal Wheelbase 15.6 inches (397 mm)
Aircraft Battery 7100 mAh
Max Flight Time (standard) EVO II Dual (640) 38min EVO II Dual (320) 40min
Max Hovering Time (standard) EVO II Dual (640) 33min EVO II Dual (320) 35min
Max Level Flight Speed (Standard) 45mph (20 m/s) (Ludicrous)
Max Ascent Speed 18mph (8 m/s) (Ludicrous)
Max Descent Speed 9 mph (4 m/s) (Ludicrous)
Max Takeoff Altitude 4.3 miles (7000 m)
Max Wind Resistance Force 8 wind
Operating Environment Temp 32-104°F (0-40°C)
Working Frequency (2.4G) 2.4~2.4835GHz
Transmission Power (2.4G) 2.4~2.4835GHz FCC: ≤26 dBm ISED: ≤26 dBm CE: ≤20 dBm RCM: ≤20 dBm SRRC: ≤20 dBm
Hover Precision Vertical: ± 0.02m (with visual positioning in normal operation) ± 0.2m (with GPS in normal operation) Horizontal: ± 0.02m (with visual positioning in normal operation) ± 0.2m (with GPS in normal operation)

Sensing System

 

Sensing System Type Omnidirectional Binocular Sensing System
Forward Accurate Measuring Range: 0.5 – 20m Detection Range: 0.5 – 40m Effective Sensing Speed: < 15 m/s FOV: Horizontal: 60°, Vertical: 80°
Backward Accurate Measuring Range: 0.5 – 16m Detection Range: 0.5 – 32m Effective Sensing Speed: < 12 m/s FOV: Horizontal: 60°, Vertical: 80°
Upward Accurate Measuring Range: 0.5 – 12m Detection Range: 0.5 – 24m Effective Sensing Speed: < 6 m/s FOV: Horizontal: 65°, Vertical: 50°
Downward Accurate Measuring Range: 0.5 – 11m Detection Range: 0.5 – 22m Effective Sensing Speed: < 6 m/s FOV: Horizontal: 100°, Vertical: 80°
Sides Accurate Measuring Range: 0.5 – 12m Detection Range: 0.5 – 24m Effective Sensing Speed: < 10 m/s FOV: Horizontal: 65°, Vertical: 50°
Service Environment Textured/patterned ground and adequate illumination (> 15 lux, normal indoor environment with fluorescent lamp on) Upward: diffuse reflecting surface with reflectivity above 20% (wall, tree, human, etc.) Downward: textured/patterned ground and adequate illumination (> 15 lux, normal indoor environment with fluorescent lamp on) Upward: diffuse reflecting surface with reflectivity above 20% (wall, tree, human, etc.)

Gimbal

 

Operation Range Pitch: -135° to +45 Yaw: -100° to +100°
Operation Range Pitch: -90° to +30° Yaw: -90° to +90°
Stability More Stable with 3 Axies
Max Control Speed (Tilt) 300°/s
Angular Vibration Range (°) ±0.005°

Remote Controller and Transmission

 

Max Signal Transmission Distance 9km FCC, 5km CE
Working Frequency (2.4G) 2.4~2.4835GHz
Transmission Power (2.4G) 2.4~2.4835GHz FCC: ≤26 dBm ISED: ≤26 dBm CE: ≤20 dBm RCM: ≤20 dBm SRRC: ≤20 dBm
Real-Time Transmission Quality 720p@30fps / 1080p@30fps
Max Bitrate of Real-time Transmission 40Mbps
Remote Controller Battery 5000mAh
Operating Hours 3h
Charging Time 2h Fast Charging
Display 3.26-inch OLED screen 854 (W)*480 (H) pixels Preview video without the need for connecting to a mobile phone

Battery

 

Battery (mAh) 7100mAh
Voltage (V) 11.55
Transmission Power (2.4G) 13.2
Battery Type LiPo 3S
Battery Energy 82Wh
Weight (g) 365
Charging Temperature Range (°C) 5~45℃
Storage Temperature & Humidity -10~30℃,65±20%RH
Recommended Storage Temperature 22~28℃
Max Charging Power Consumption (W) 93W
Charging Time 90min

Charger

 

Input 100-240 V, 50/60 Hz, 1.5A
Output 13.2 V ⎓ 5 A 5V⎓3A 9V⎓2A 12V⎓1.5A
Voltage 13.2 ± 0.1 V
Rated Power 66 W

APP

 

iOS Autel Explorer
Android Autel Explorer

Storage

 

SD Storage Standard: 32 GB, max. support 256GB ( UHS-3 rating required )
Internal Storage 8GB